Scaffold Plank

Reliable Scaffold Planks

Scaffold companies need planks they can rely on—planks that can stand up to every type of stress—including rain, snow, heat, cold, heavy loads and wear from numerous assembly and dismantle cycles. RedPlank™ Scaffold Plank is the solution: manufactured to be safe and reliable with predictable performance.

  • Safe—proof-load tested at our plants to ensure compliance with RedBuilt™ quality standards and OSHA deflection limits.
  • Reliable—made from multiple layers of thin veneer to minimize the natural inconsistencies in wood, like knots.
  • Predictable—manufactured to provide consistency you can feel.

Features & Benefits

All RedPlank™ LVL Scaffold Planks are manufactured to the following design properties, and are proof-tested at the manufacturing plant to verify that they meet or exceed these properties at the time of manufacture:

Modulus of Elasticity (E): 2,200,000 psi

Flexural Stress (Fb): 2900 psi

Horizontal Shear Stress (Fv): 145 psi

These design properties have been determined in accordance with ANSI A10.8-2001 Appendix C. They are applicable for planks that are in new or like-new condition, used in a dry-use service environment (Moisture content < 19%) and are loaded in the plank orientation (flat-use). For wet-use service (Moisture content between 19% and 30%), adjust all design values by 0.80.

Back to Top

applications

Industrial Applications

Using products that were pioneered by our founders, RedBuilt™ lifts Industrial applications to a whole new level of service. Backed by our manufacturing technologies and supported by industry-leading technical service and sales support for contractors and engineers, RedBuilt™ can help you increase productivity, lower costs and work safer.

Reliable Scaffold Planks

Scaffold companies need planks they can rely on—planks that have minimal twist and bow after every type of stress—including rain, snow, heat, cold, heavy loads and wear from numerous assembly and dismantle cycles. RedPlank™ Scaffold Plank is the solution: manufactured to be safe and reliable with predictable performance.

  • Safe: Proof-load tested at our plants to ensure compliance with RedBuilt™ quality standards and OSHA deflection limits
  • Reliable: Made from multiple layers of thin veneer to minimize the natural inconsistencies in wood, like knots
  • Predictable: Manufactured to provide consistency you can feel For detailed information, see our new RedBuilt™ RedPlank™ Guide

Build Safely

We at RedBuilt™ are committed to working safely and want to remind you to do the same. We encourage you to follow the recommendations of OSHA in the U.S. or provincial regulations in Canada regarding:

  • Personal protective equipment (PPE) for hands, feet, head and eyes
  • Fall protection
  • Product performance specification
Back to Top

common questions

q1 What is the availability of RedPlank?

Standard production at our Stayton facility is 2-3 weeks. However, a limited supply of customizable product is readily available in select sizes for pickup or delivery within 2-3 working days at our Chino, CA, Delaware, OH and Stayton, OR facilities.

q2 Can you emboss our name on planks?

Yes, RedPlank is customizable, we can emboss up to 9 characters on the product.

q3 Do you proof-load your scaffold plank products?

Yes, every piece of RedPlank – not just a sampling of products – is proof-loaded at our Stayton facility before shipping.

Back to Top

Forming and Shoring

Forming and Shoring

Efficient Forming Products

The characteristics of RedForm™ LVL and RedForm™ I-joists make them ideal for working in concrete forming applications. With many of the natural inconsistencies found in wood like knots, splits and wane removed during the manufacturing process, reliable engineered RedForm™ LVL and I-joist forms stand up to multiple reuses. You’ll find all the reliable, innovative products that you’ve been using, and you’ll work with a single-source, service-oriented supplier.

Features & Benefits

RedForm™ LVL Form Beams, Wales and Shores

  • Supports heavy loads
  • Available in long lengths
  • Uniform, flat and level forming surfaces
  • Durable for multiple reuse

The following sizes are available: 

Form Beams
Widths: 1 ½”, 1 ¾", 2 ½" and 3 ½"
Depths: 3 ½"–11 ¼"

Wales
Widths: 1 ½", 1 ¾" and 2 ½"
Depths: 5 ½"–11 ¼"

Shores
3 ½" x 3 ½"

Some sizes may not be available in your region. Custom sizes also available.

RedForm™ I-joists

  • Lightweight for fast installation
  • Durable for multiple reuse
  • Available in long lengths
  • Resists bowing, twisting, and shrinking
  • Camber available for long-span capability

The following sizes are available: 

RedForm-I65™ and I90 I-Joists
Depths: 9½", 11 7⁄8" and 14"–20" in 2" increments

RedForm-I90H™ I-Joists
Depths: 11 7⁄8" and 14"–20" in 2" increments

Some sizes may not be available in your region. Custom sizes also available.

Back to Top

applications

Industrial Applications

Using products that were pioneered by our founders, RedBuilt™ lifts Industrial applications to a whole new level of service. Backed by our manufacturing technologies and supported by industry-leading technical service and sales support for contractors and engineers, RedBuilt™ can help you increase productivity, lower costs and work safer.

Efficient Forming Products

The characteristics of RedForm™ LVL and RedForm™ I-joists make it ideal for working in concrete forming applications. With many of the natural inconsistencies found in wood like knots, splits and wane removed during the manufacturing process, reliable engineered LVL forms stand up to multiple reuses. You’ll find all the reliable, innovative products that you’ve been using, and you’ll work with a single-source, service oriented supplier. For detailed information, see our new RedBuilt™ Industrial Forming & Shoring Guide

Innovative Forming Systems

At RedBuilt, we take pride in offering innovative forming systems to our customers, with best-in-class products and services. Through our sister company Olympic Panel & Veneer, we provide formwork tables built from the best of both companies – premium, specialty overlay concrete forming panels from Olympic Panel and RedForm I-joists from RedBuilt.

Together, these concrete forming tables allow our customers to take on even the largest, most complex projects. To learn more, contact Industrial Sales & Market Development Manager Paul Drace today.

Build Safely

We at RedBuilt™ are committed to working safely and want to remind you to do the same. We encourage you to follow the recommendations of OSHA in the U.S. or provincial regulations in Canada regarding:

  • Personal protective equipment (PPE) for hands, feet, head and eyes
  • Fall protection
  • Product performance specification
Back to Top

common questions

q1 What sizes of I-Joists are available?

RedForm-I65 and I90 joists are available in depths ranging from 9 ½” to 20”.

q2 Can RedForm I-joists be cambered?

Yes. RedForm I-joists can be cambered up to a radius of 2,250 feet.

q3 Is your product sealed?

RedForm LVL can be sealed upon customer request. RedForm I-joists are not sealed.

q4 Do you have design software available?

We do not currently have design software available. We do, however, have specifying literature available for download, or printed versions available on request. Also, our Technical Sales Representatives are also available to provide any assistance with design needs or requirements.

q5 Why should I specify RedForm I-Joist over residential products?

The performance characteristics of RedForm I-Joists are different than residential products. RedBuilt’s industrial products are custom designed for the applications, and have different performance characteristics than residential products.

Back to Top